Sérpöntun
 
These DiBO industrial stationary high-pressure units offer you unlimited possibilities for diff erent cleaning applications for
professional and industrial use. The pump units can be connected to pipes with a number of user connection points. The pumps are automatically switched on or off depending on the number of users, so the required capacity is always guaranteed.
As standard the MPU-M is suitable for a water supply temperature up to 40 °C and has a maximum power connection of up to 100A. The high-pressure unit is also optionally available with HT pumps that are suitable for a water supply temperature up to 75 °C (peaks to 85 °C). With a temperature of 40 °C or more, always use a prepressure pump supplying an inlet pressure of at least 3 bar.
The general options are summed up below, but many other combinations and capacities are also possible. You always start
by choosing the basic confi guration depending on the number of required pump units and the type of pressure regulator (1.249.1xx). You can then select the type of pump units depending on the required pressure and the fl ow rate. Note that you must select the same number of pump units depending on your fi rst choice (1.294.1xx). If you want to regulate consumption even more precisely (to max ½ of the fl ow rate of 1 pump unit), and save energy, choose the frequency regulator option (maximum of 1 per machine).
Contact our sales department to discuss the confi guration options and the most suitable setup for your specifi c use. Together
with our R&D department they will look for the best solution to your needs!
Note: For pump units above 7.5 kW a soft starter on each pump unit is strongly